| Main standard Configuration |
| 1 | Bucket Capacity | 3.0M³ |
| 2 | Rated Load | 5000kg |
| 3 | Travelling Speed |
| Forward 1st | 0-11.5km/h |
| Forward 2nd | 0-37.5km/h |
| Reverse 1st | 0-17km/h |
| 4 | Max. Traction | 165±5kN |
| 5 | Max.Break Out Force | 150±5kN |
| 6 | Min. Turning Radius (outside tires) | 6700±50mm |
| 7 | Max. Dumping Height | 2970±50mm |
| 8 | Max. Dumping Reach | 1200±50mm |
| 9 | Total Hydraulic Cycle Time | ≤11.1s |
| 10 | Full Bucket Lifting Time | ≤5.76s |
| 11 | Wheel Base | 3427±30mm |
| 12 | Tread Width | 2300±10mm |
| 13 | Dimensions (LxWxH) | L:8075xW:2960xH:3500mm |
| 14 | Min. Clearance Over Ground | 380±20mm |
| 15 | Operating Weight | 16200±200kg |
| Diesel Engine |
| 1 | Model | WEICHAI WD615 | C6121　 | CUMMINS6CTA8.3-C215 |
| 2 | Type | Direct injection, turbocharged, water cooling, 4 strokes, 6 cylinders |
| 3 | Rated Output | 162kW | 162kW | 160kW |
| 4 | Rated Speed | 2200rpm2200rpm2200rpm |
| 5 | Max. Torque | 855N.m | 860N.m | 908N.m |
| Transmission |
| 1 | Model | ZL50 Hangzhou Advance Gearbox Group Co., Ltd |
| 2 | Rated Input Speed速度 | 2200rpm |
| 3 | Transmission Type | two forward and one reverse gears/power shift, planet type |
| Mechanical Gear Ratios |
| 1 | Gear I | 2.4346 |
| 2 | Gear II | 0.6532 |
| 3 | Reverse | 1.7814 |
| 4 | Hydraulic Oil Pressure | 1.10-1.40Mpa |
| 5 | Inlet Oil Pressure Of Torque Convertor | 0.30-0.45Mpa |
| 6 | Outlet Oil Pressure Of Torque Convertor | 0.20-0.30Mpa |
| 7 | Lubricating Oil Pressure | 0.10-0.20Mpa |
| 8 | Max. Permissible Temp & Outlet Of Torque Convertor | 120℃ |
| Transaxle & Tyre |
| 1 | Transaxle Type | self-made by Meritor technology |
| 2 | Drive System | 4 wheel drive |
| 3 | Rear Axle Oscillation | Center oscillation |
| 4 | Oscillating Angle of Rear Axle | 13° |
| 5 | Carrier Assembly Reduction Ratio | 4.625 |
| 6 | Wheel End Reduction Assembly Reduction Ratio | 4.94 |
| 7 | Tire | 23.5-25 |
| 8 | Pressure Of Tire | 0.28-0.32MPa |
| Working Hydraulic System |
| 1 | Working Pump Type | Gear Pump |
| 2 | System Working Pressure | 17MPa |
| 3 | Lifting Cylinder Bore x Stroke | 165x757mm |
| 4 | Tilting Cylinder Bore x Stroke | 200x540 mm |
| Steering System |
| 1 | Type | Articulation, full hydraulic power steering system with flow-amplified system |
| 2 | Steering Pump Type | CBGJ2080 |
| 3 | Max. Working Pressure | 12MPa |
| 4 | Steering Cylinder Bore x Stroke | 100x342mm |
| 5 | Max. Steering Angle | 35º±1º |
| Brake System |
| 1 | Type | Air over hydraulic disc on four wheels brakes |
| Oil Injection Capacity |
| 1 | Fuel Tank | 300L |
| 2 | Engine Oil | 30L |
| 3 | Transmission | 45L |
| 4 | Hydraulic Oil Tank | 200L |
| 5 | Transaxle | 30L |
Indonesia
English